Tuesday, May 5, 2020
Polluters Dilemma free essay sample
What motives would the company have to install the new technology? Given the fact that there are recent evidences to support that if the companyââ¬â¢s emission level stays the same, the fish in the lakes and rivers in the area might soon be unsafe for human consumption, it is only the right thing to consider and do install the necessary technology. This is in the interest of not only of the environment but of the ultimate benefactor of the environment which is the human beings. The motive here can be simply considered as a form of psychological altruism in which we value benevolence or kindness towards others. In the perspective of a company, it can be considered a form of being socially responsible. This can also be viewed under the principle of duties, specifically duties to others. The others refer to the environment and the human beings. Even if the factoryââ¬â¢s emission is within the legal limits levels, given the fact that new evidence are coming and knowing that the government is always lagging behind scientific evidences, the motivating to do is to install the new technology. We will write a custom essay sample on Polluters Dilemma or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page However, it can be argued as well in the perspective of self preservation. The company fears that backed by public opinion the company maybe force to not only install the new technology but also requires monthly emission level reports which is much expensive and time consuming. What motives would the company have to delay installing the new technology? As stated the companyââ¬â¢s environmental compliance budget is tight. The company needs to show profit for the year if it has to survive with stocks and investors confidence. The motive that can be argued or considered here would be on the basis of duty to oneself, for self propagation and interest. Psychological egoism can also be argued here. It can be discoursed that in the interest of the factoryââ¬â¢s workforce or personnel, to remain able to provide job, tax and overall to the ââ¬Å"in-lineâ⬠benefactor (e. g. workerââ¬â¢s family, the government) the company has to survive and thus should be able to show profit for the year instead of consuming it towards installing a new technology. The fact that the government has not yet imposed a new regulation and the company is legally following the government requirement on its emission it can be considered as doing its responsibility and that installing the new technology is irrational and can be argued as unethical which is tantamount to self destruction. Self preservation is important for the company. Why might companies in this region prefer for the government to impose new regulations? There are a few things to think along this line; one is that the companies would want to show to their clients and investors that the reason they might not be posting profit is that because they are socially responsible, installing expensive and time consuming new technologies for the benefit of the environment. This may encourage more investors especially those which possess and highly respects social altruism. This might come up if the government had been quite up to date in its environmental regulations. The second thought however, would be that for their own benefit and posting of profit for the year, the companies would prefer the government to give the go signal since the government is always delayed in its environmental policies and regulations. Therefore, the companies would benefit from the time delay of the installation of the expensive new technologies. This is along lines of self preservation and interest.
Saturday, April 11, 2020
Grade Sample Literary Theme Essay
Grade Sample Literary Theme EssayGrade Sample Literary Theme Essay is the name given to a literary theme paper that is not too complicated in format. This kind of paper can be a key element in helping students attain college acceptance.The literature majors will enjoy reading a literary theme essay. The word 'sample' is not used to show that there is a lack of originality. Even if there is only one writer involved, this particular paper should reflect her point of view on a literary theme, so that it comes across as different from others.One example would be a study of the term 'theme.' A writer may choose to write about how a particular author has a theme that has been used for many years. Other writers may say that they have written several such themes and have been discussing the same topics for quite some time. The essay should depict a particular creative, fresh and unique view on the topic.A literary theme essay can also touch upon themes like 'memoirs,' 'epitaphs,' 'heroes,' ' eroticism,' etc. These words represent different facets of literature. A writer may decide to cover the entire topic without any puns, e.g. 'Erseaphs'Aesthetic fictions.' An academic paper might discuss a particular author or a theme within a particular period of time.The main task of a literary theme essay is to reflect the writer's individual opinion on a specific theme. The essay should be readable, interesting and should be filled with content. There should be enough information in the essay to challenge the reader. The essay should not contain too much information and should be able to make sense out of the information.The basic purpose of these essays is to express the student's own viewpoints on the topic. These essays could be used to prepare the student for a college entrance examination.It is good to use sample literary theme essay as it prepares the student for a college entrance examination. The writer should ensure that she has chosen a theme that will meet the expectat ions of the exam taker. The theme must make sense and thus enable the writer to discuss the topic. Essays that deal with controversial subjects are not allowed.
Thursday, April 2, 2020
Asian Crisis Essay Research Paper The continuing free essay sample
Asiatic Crisis Essay, Research Paper The go oning Asiatic economic crisis that began in mid-1997 ranks as Asia # 8217 ; s 2nd biggest event since World War II. The crisis all of a sudden halted the part # 8217 ; s unprecedented three decennaries of rapid economic growing. Within Asia itself, the crisis has had non merely serious domestic societal, political, and economic impact, it has affected intra- and extraregional international dealingss, every bit good as rational and policy discourse. At the same clip, the crisis has about incompatibly, spawned the deepest uncertainness yet among Asiatic authorities and concern leaders and the populace at big about the wisdom of following the universalistic ( but truly Western, particularly American-propagated ) capitalist philosophy of free markets, private endeavor, international openness and political democratisation as the most unafraid way to economic prosperity and societal wellbeing. There is now more or less an understanding that the domestic beginnings of the Asian cris is lay in macroeconomic instabilities, structural lacks in fiscal sectors, and defects in political and corporate administration. We will write a custom essay sample on Asian Crisis Essay Research Paper The continuing or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Some or all of these jobs were more terrible in the states most affected-Thailand, Korea, Indonesia, Malaysia-than in those that were comparatively unscathed-Philippines, Singapore, Taiwan. A twelvemonth ago, at a Corporate Conference organized by the Asia Society in Hong Kong, a transnational Eminent Persons Group delivered a study, # 8220 ; Asia at the Hamlets: The Path Ahead. # 8221 ; In that study, the assembled experts concluded that provided the needed alterations are put into topographic point, the States of East and Southeast Asia should emerge from the crisis better positioned to better the lives of their citizens and to lend to international stableness and prosperity. I hope that the state of affairs will alter. On January 8, 1999, the ASIAN Secretariat issued a imperativeness release about the Second Meeting of ASIAN Heads of Statistical Offices, held in Bali on January 5-6.
Sunday, March 8, 2020
How to Write a Case Study and Why This Paper Might Be Useful
How to Write a Case Study and Why This Paper Might Be Useful A case study is something you should not simply write, but also solve. The information provided in such kind of paper should be a response to the existing problem. Except for defining and analyzing the issue, it is also important to find all possible ways out. Present them to the reader in your text. The Goal of a Case Study A case study is usually accomplished to earn the trust of your clients/patients. If you are still a student, it is done to prepare you for further challenges associated with your profession. You might be ahead of the competition when it comes to accounting, nursing, or writing, but your clients or readers expect a proof. That is when the need to work on a case study appears. Good examples of the possible work can chronicle the positive influence your business possesses on current or past clients. Thus, we recommend having a look at free online samples of case studies before starting to write the paper on your own. Two Approaches to Writing a Case Study There are two specific methods used to prepare a case study. The first one is the analytical approach. The second one is the problem-oriented technique. Type 1. When you deal with the analytical approach to solving a case study, you must understand what and why took place. A deep analysis of the situation is required. It is not important to work out the definition or suggest solutions to the existing problems. Itââ¬â¢s all about analysis. Type 2. When we speak about the problem-oriented method, a case study serves as the analysis tool applied to state and describe the basic problems as well as offer possible solutions. While the problem-oriented method is a bit more popular, letââ¬â¢s dedicate more time to studying this type. Problem-oriented Method Specifics Any successful case study worth an ââ¬Å"Aâ⬠should analyze and examine the real-life problem which is relevant for the modern society. The issue has to be solved in the most beneficial way. A case study has to: Relate the theory to practice on the example of the given situation. Include the example which is up-to-date and proved. The readers should receive enough information to agree with the author. E.g. the author may use the ideas and knowledge gained during the coursework writing process. Then, he must apply his skills to the practical situation at hand in the paper. The answer to main questions ââ¬â define the problems. Select the basic points of your project. Find and provide solutions to these problems. Tell about the best solution. Include detailed information on how the solution has to be implemented. By the way, note that the case refers to the real-life situation while a case study is the analysis of such situation in the shape of academic or scientific paper. Steps to Writing a Case Study If you want to write a case study without any barriers, it is important to collect enough information to use as the supportive points for your suggested solutions. Also, it is crucial to know the steps by heart. A typical case study usually includes eight sections. Synopsis (a.k.a. summary) It is a really brief review which describes the problem and necessity to solve it. Create a plan/outline to understand what should be included in your paper and what the order should be. Tell more about the area of research to your readers ââ¬â it might be a review of the chosen organization (medical or legal entity, etc.) State specific theory which will be later applied The information should involve the essential questions and a full picture of the essential contents of the research Pay attention to any assumptions that you make. Sometimes, the author cannot possess all the required information, so he is allowed to make some forecasts and guesses on his own. ââ¬Å"It has been assumed thatâ⬠¦Ã¢â¬ and similar phrases should be used then to let your reader understand that this piece of information is not 100% accurate Findings Make a list of all problems discovered during your work on the case study. Every specific analysis of the separate problem has to be followed by the facts along with the course concepts and selected theory. It is important to find out the underlying issues like in the sample: cross-cultural conflict may be the only cause of the underlying problem of dominating and discriminative ruling system of the target company The section is usually divided into several smaller sections; each of them stands for explaining another problem Discussion Take some time to demonstrate and test the most critical problems. Summarize them Define possible solutions to the basic problems. Mind that there might be several solutions to a single problem from time to time In short, outline each existing solution and then examine it regarding its pros and cons There is no need to turn to your coursework or theory in this section of your case study Conclusion Include the description of the results mentioned in the findings and discussion sections Recommendations Right, unlike other school or college essays, a case study has more sections after the concluding paragraph. First, decide which of the offered ways out should be adopted in the given situation In short, provide credible information to defend your point of view and explain to your readers how it might solve the problem You have to write this section in a forceful style meaning recommendations must be persuasive enough to ensure your audience In this part, an integration of theory and coursework may take place Implementation Of course, you have to provide information once the solution was implemented to prove whether the chosen method is really effective. Make a list of what has to be done, by whom, and when it should be implemented If it makes sense, include an approximate results/calculations of costs in both, financial and time sense References/bibliography Just as any academic paper, a case study must have a full bibliography included at the end Use all possible sources that are relevant to your topic during the entire writing process, but donââ¬â¢t forget to cite them properly. Also, make a list of sources you use ââ¬â each time you add a quote or some statistics, put it on the list You may read more information on creating annotated bibliography here Appendices (if any) Note any unique information that is connected with your analysis but which would have interrupted the logical flow of the paperââ¬â¢s body A Guide to Writing a Business Case Study We have discussed the components of the medical/law/social science case study. This sort of work is also popular among business people. Thus, letââ¬â¢s discuss the way your business case study should look. Identify the Suitable Candidate Writing about your previous articles and researches demands more than selecting a patient and telling the story. Three things every author needs are permission, citations, and an outline. You should look for the candidates with the following features: Knowledge of product/service based on valuable facts. The person must be able to discuss the productââ¬â¢s value. Noticeable results. The person should be able to share his own experience and provide information which may encourage other readers to become your clients. Well-known people and brand names.à Having brand recognition can lead to 24.4X as much growth as companies without it. Switchers. Try to make your competitorââ¬â¢s customers like your product so that they move to your company sooner or later. Reach Out and Help Project Participants Having right people on board is possible only through opened communication in a friendly atmosphere. It involves sharing information like personal experience, skills, knowledge, and expectations. It will help to come up with the specific timeline. The best way is to kick off the process by sending an email to each potential participant with the details like the right to use the brand name, share personal information with the third party, results, etc. Do not forget to include the following elements in this stage: Case study release form (first, it is important to provide the basic information on your organization) Success story letter (it may be an email; work on your plan to include it in this letter) The acceptance (make sure to receive the approval from the target person) The questionnaire or poll (come up with the set of corresponding questions) The interview (the series of custom questions is required) The draft review (you have to check your writing at least twice) The final approval (once you scan and edit all information) Are You Asking the right Questions? To get the desired answers, you have to set up questions logically. Try to make them more specific than general. Each section should lead to the particular solution to mention it later in the case study. Think about: Your projectââ¬â¢s goals Analysis of the possible organizationââ¬â¢s challenges What makes your readers believe that your product/service is better than your rivalââ¬â¢s What did your decision-making process look like Applicable ways for your product The problem can be solved only through properly stated questions. "The Golden Rule of Interviewing" is something you may need to understand the nature of interviewing. Make the client tell more about his own business or existing problem. Why does he or she need this information? Why is this person important for your case study? Such facts will help to identify the solution more accurately. It is important to guide your clients through the entire decision-making process. Provide help with filling out various forms. This process turns into implementation stage where the solution is used in practice. Donââ¬â¢t start writing an introduction before the result is obtained. The solution will help to understand how the customer is using the product, its benefits, and further actions. Finally, in the results section, the author must uncover impressive measurable outcomes with the help of specific figures. It is crucial to interpret each number to your readers properly. The questions in this section might include: How is the product/service helping clients save time and increase productivity? In what ways your competitive advantage is built? How much have you raised metrics known as X, Y, and Z? Make a Layout When the time comes to turn the entire information into the written content, it is hard to write down even an introduction. Often, students and business people get lost at this point even though the previous stages were completed successfully. The most important thing is that there is no universal structure of introduction, body, and conclusion for your case study paper. Unlike a regular school essay or college research paper, a case study may have many different shapes. For instance, you can support your paper with facts only, or you can demonstrate your findings and results with the help of visual elements. Visual content is extremely popular among business people. Now that we have discussed how the text of the scientific case study can be divided, itââ¬â¢s time to find out how a business case study can be structured. Title:à Keep it brief. It can be provided with the help of the most compelling achievement. Executive Summary:à Do not include more than 3 sentences as the review of the study. Include up to three bullet points to show the metrics responsible for success. About:à Make an introduction to the people or organization. Here is a valuable tip: use information posted on the personââ¬â¢s or companyââ¬â¢s LinkedIn profile or official website. Challenges:à The section should not include more than 3 paragraphs that tell about the clientââ¬â¢s challenges and goals, prior to using your offer. This action also involves objectives set by the client. How You Helped:à As a mentor in the story, you should take the time to explain your role in finding the solution to the problem. It implies that you have already provided the possible ways out. Results:à Once again, the section should not contain more than three paragraphs. To provide readers with analysis of your work and understand whether the solution was effective, ask your participants to provide different testimonials. This specific feedback is a good proof of your competence. Include numbers to quantify your contributions. Extra Visuals or Citations:à The last page should include a bibliography, so it is obvious that certain amount of resources have to be used throughout the case study paper. 2-3 good quotes would be enough to describe and support the problem or solution. Now that you know how to write a case study at both scientific and business level, you may try doing it on your own. If you have any troubles with any of the sections or entire content, it is better to order professional case study paper from the trusted website.
Thursday, February 20, 2020
Trade Union Decline Essay Example | Topics and Well Written Essays - 2000 words
Trade Union Decline - Essay Example due to the implementation of varied types of macroeconomic policies, the rate of productivity and performance of the employees enhanced but it decreased the power of trade unions in these organizations. Due to which, the density of trade unions as well as the power of the members of the unions reduced that offered negative impacts over the productivity and brand value of the organization in the market among others. Other than this, as the rate of private sector organizations are increasing rather than manufacturing sectors, the demand for trade or labour unions is decreasing in varied countries such as United States, United Kingdom, and European Union etc. Due to which, over last 25 years, the demand of trade unions is decreasing at a rapid rate (Visser, 2002, pp. 734-745). Trade union is recognised as an association of a wide range of wage-earned members in order to amplify the working conditions and living standard of the employees of the organization. Other than this, the trade union is considered as the association that works for the welfare of the employees so as to amplify their dominance and position in the organization as compared to management. Moreover, it also tries to fulfil all sorts of desires such as pension, medical allowance, incentives, and bonuses of the workers so as to motivate them towards the assigned tasks that may improve the overall productivity of the organization. However, the demand of trade unions is decreasing as the amount of private sector organizations such as catering, IT organizations etc is increasing at a rapid pace as compared to manufacturing organizations. The trade unions act as a catalyst for the workers operating in different organizations. This is mainly because; it works always in favour of the employees by highlighting their needs and requirements (Snell & Bohlander, 2010, pp. 812-823). Trade union members communicate with all the employees of the organization so as to analyse their requirements such as pensions,
Tuesday, February 4, 2020
How is the Future portrayed in the novels, WE by Zamyatin and 1984 by Research Paper
How is the Future portrayed in the novels, WE by Zamyatin and 1984 by Orwell And What do the authors warn us against - Research Paper Example well and Zamyatin didnt actually believe was going to happen, but they both feared that the societies of the world would be going down those roads, so they wrote their dystopian novels about this. There are a variety of things that Orwell was warning us in his novel, and these themes are reflected in We. One is that there should not be a country that is too powerful, because that reduces the freedom of the citizenry. Related to this is the warning about tyranny ââ¬â if the government is too powerful, then it represses its citizens. Repression and censorship, which comes when a government is tyrannical, is another warning that Orwell sounds, and, with this, comes sexual repression. This essay will be structured in the following ways ââ¬â first, the concept that a government may become too powerful will be examined, by looking at how this is portrayed in each of the novels. This really is the central tenet of each of the novels, because a government that is too powerful is one that will react like the governments do in each of these novels. First, Orwell seems to be cautioning against the idea that any one country could become too powerful. The slogan in the future was ââ¬Å"War is Peace, freedom is slavery, ignorance is strengthâ⬠(Orwell 26). The implication in the novel is that there are three super states that are at perpetual war with one another (Williams 12). That said, although some might misinterpret the novel as being against socialism or communism, in that, during this period of time, the Soviet Union was still a super power, therefore could be construed as being one of the superstates in the novel, Williams (12) states that this was not what was intended ââ¬â rather, he did intend this to be an attack on a centralised economy in general. It was a full perversion of the centralised government that went beyond what was happening in the Soviet Union during this time. As with everything else in this novel, he took the concept of centralised government to the
Monday, January 27, 2020
Building Economics And Life Cycle Costs Construction Essay
Building Economics And Life Cycle Costs Construction Essay Economic understanding regarding building designs usually aim for steering building decisions to achieve for two situations: economic efficiency and/or cost effectiveness. For instance, a building design that, besides assuring to be profitable is promising to be more profitable than other available solutions, can be considered to be the economically efficient choice for an investor. Yet, a building decision that is considered cost-effective, guarantees, for instance, that a design solution with benefits equal or better to those of competing alternatives has lower costs. Cost-effectiveness is thus understood as a subset of economic efficiency; yet, both conditions can appear in one solution, but dont have to. The use of optimization thus reflects the strategy of achieving specific economic goals. Consequently, by minimizing life-cycle costs or maximizing net benefits, an economic analysis is applied to determine the most cost-effective or the economic efficient choice respectively . Overview The reflection and analysis of life-cycle costs (LCC) is an economic evaluation technique that determines the total amount of cost of a product or project over time. Having in common that the role is to provide insight in future matters regarding all occurring costs, LCC assessment in business organizations today, serves mainly three purposes : To be an effective engineering tool for use in design, planning and project execution To be a design and engineering tool for environmental purposes To be applied proactively in cost management. A similar understanding applies to the building sector. With the increasing need to deliver economic solutions, developers, designers, planners, engineers and managers try to foresee, steer and control costs at all stages of a buildings life-cycle. By overseeing a building projects inherent costs and directing attention toward its root causes, building projects can get useful decision support before, during and after its realization, performed on large and small buildings, on partial building elements, or on isolated building systems . Throughout the design, development and operation of building projects, LCC can thus be successfully used to compare alternatives to find the most cost effective solution . With the growing pressure of governments to hold companies responsible for the costs that their products generate to society and its environment, consumers are likely to benefit from the use of LCC assessment. Sustainable building strategies require foreseeing a reduction and control of significant LCC, such as energy costs for projected building designs. Consequently, organizations such as the National Institute for Building Science or the Whole System Integrative Process (WSIP, 2006) demand for early integration of cost related planning issues into the building design process. Eventually, future building designs that are less costly may also be considered better in terms of quality when all costs of a buildings life-cycle are adequately included. A strong commitment of building design is thus to enhance the practical value of buildings. While the value of products is defined as proportionate to the satisfaction of needs divided by the use of resources, its value is proportionate to quality divided by costs . Value-driven building designs therefore require being both: quality driven and cost conscious. In addition, probably the most important condition for resource optimization is appreciation of the built structure by its users: only buildings that are valued will achieve a long lifespan (Eberle, 2007). Proactive cost management is understood as an effort to eliminate product costs before they occur, as opposed to reducing costs after they are incurred, which is considered reactive cost management . Expecting the design and planning of building projects to be proactive view is inevitable, since changes in the later planning and execution phases or even during building operation become more and more difficult to deal with. Especially during initial design stage, the consideration of LCC can help designers to make their decision-making process become more cost efficient . In reality, a proactive involvement of cost might not be the case. Essentially, comparisons or studies on the building design and its influence on the cost of building operations over the life of a building are barely explored during the early design phase. If of any concern, financial aspects during early stages of design are mainly focusing on preventing uncontrolled cost expansion of initial, predominantly constru ction costs. The possibility of actively integrating all LCC members during the early design stages remains difficult to achieve as current methods of sequential design and cost estimation make it hard to foresee the impact of investment and to reduce building operation costs to an extent that would change the perception of these capital costs. In addition, the implementation of such proactive cost management quite often incurs more costs up front, for instance for the extended amount of research and development that projects then require for. Such consequences, and with them the traditional view on cost management can easily challenge the implementation of proactive consideration of LCC assessment, where necessary time and funding for the early stages of design and planning appears insufficient . A consideration of proactive design understanding and its use of LCC assessment thus also involve necessary changes in terms of thinking, such as from a partial focus to holistic thinking (Eberle, 2010), from structure orientation to process orientation or from cost allocation to cost tracing . Life Cycle Cost (LCC) With emphasis on cost-effectiveness the consideration of life-cycle costs (LCC) is used to evaluate competing alternatives primarily on the basis of costs, allowing for choices for a given building, facility or system. The method is to compute the LCC for a particular course of action by summing all significant, time adjusted costs associated with it over the relevant period of time. The method of using LCC is thus applicable to building decisions that require for cost related decision-support, such as system modification, replacements or combinations of interdependent budgets, budget allocations, or lease or buy decisions. Yet, it is also applicable for the evaluation of competing building designs; suitable, when focusing on cost rather than benefits for two or more mutually exclusive project alternatives. Typically, the analysis or assessment of LCC includes all initial and future costs that are affected by the decision and excludes others that are not. The exclusion of costs is no t necessarily required when their contribution can help to better understand the impact between cost consideration and the amount of improvement (Ruegg Marshall, 1990). LCC of building projects are often distinguished according to the building projects phase and are likely to be separated into initial (capital) cost, operational and post-operational costs Pushkar et al. (Pushkar, et al., 2005). Figure 2.x: Life-cycle Costs of a building life cycle The diagram in Figure 2.x illustrates the occurrence of different LCC members of the BVO model over growing operation time. It also demonstrates the increasing significance of continuous, operation costs over a projects running time, as its percentage of the total expenditure steadily increases compared to the initial investments at the project commencement. Net Present value (NPV) Besides LCC considerations of evaluating building designs, economic understanding of monetary systems requires to foresee their change of value over time, due to inflation, its investment to generate future profit, or both. In the building sector, the most commonly used methods of LCC assessment are accounting systems, initially developed to determine the financial worth of an investment; they are as follows : Simple payback: defined as the time taken for the return on an investment to repay the investment. Net present value: defined as the sum of money that needs to be invested today to meet all future financial requirements as they arise throughout the life of the investment. Internal rate of return: defined as the percentage earned on the amount of capital invested in each year of the life of the project after allowing for the repayment of the sum originally invested. LCC analysis is commonly performed using present value currency representation. In the following, the use of net present value is explained more closely as it has been implemented in the BVO model as it complies with the decision to use LCC for the assessment of design and its use allows for appropriate representation of costs elements in reference to their timely occurrence. The use and implementation of Net Present Value (NPV) models enables the adjustment of currency amounts in relation to their time of occurrence. It is thus a considerable measure when include costs elements of different time occurrences. The NPV is thus typically suggested to analyze the profitability of long term investments or projects, or the evaluation of available options (Dale, 1993). Essentially, it compares the value of money today to the value of that same amount in the future, taking inflation and returns into account. Among others, Ruegg (1990) defines the net present value as: (x) , where is the estimated cost in year t, d is the discount rate, and T is the period of analysis in years. The NPV of a building project takes into account all the apparent variables acting upon a cash stream; it is thus sensitive to theà reliability of future cash inflows that an investment or project will yield.à If the NPV is positive, it should be accepted. However, if NPV is negative, the project should possibly be rejected because cash flows will also be negative. Discount rate The discount rate is a method of determining the time value of money. To prevent the value of investment eroding by the effects of inflation, the factor of inflation can be integrated into the discount rate, known as the net of inflation discount rate and calculated as : (x) For instance, if inflation is 5% per annum and interest is received at 10%, then: (x) Thus, to make the influence of the discount rate become realistic it requires for reliable input to foresee the appropriate adjustment of financial aspect of interest and inflation. Similar to the typically practiced modification of construction costs that are based of earlier cases, such modification is necessary for future costs to remain representative. The accuracy of predicting and adjusting the monetary value may appear, however, problematic with growing life-time estimations of a building, as long term predictions become increasingly vague. Setting the study period The consideration of a LCC study period is expected to relate to the following factors such as the investors and stakeholders projected time horizon, the anticipated life time of the building, project, etc., the decision whether to accept or reject the choice, or whether the perspective is individually private or public perspective oriented. For instance, an investor or project developer might only be interested in short term cost as it is intended in creating revenue from the sale of the finished building project, while a building owner or operator might rather focus on evaluation the operative cost of a building design and their involvement over the complete life-cycle. When considering the overall sustainability of a building project, the complete life-cycle must be considered and anticipated. LCC assembly Buildings LCC are categorized by the three phases that they go through during their life-cycle. They are the initial or capital cost (1) at the beginning of a building project that involve its planning, design and realization, the operational cost (2) occurring during the buildings active phase of use, and the post-operational cost (3) that assemble the costs at a building lifes end. Though the three life cycle phases for buildings are clearly defined, their transition at a specific point of time can be vague, for example a building might already be partly operating while other areas of the building are still under construction. Figure 2.x describes the three phases and their overlapping character of transition between them. Figure 2.x: A buildings life-cycle phases In addition, operational phases can be interrupted, or at least obstructed by renovation or refurbishment phases to ensure or reinstall a buildings quality and use. For instance, building developments of industrialized countries with a high demand on energy costs, suggest that a buildings life-cycle performance can be improved when taking a renovation period of 25-30 years with a constant improvement of the buildings insulation properties into account . Figure 2.x describes how the buildings life cycles can be extend through periodic renovations and/or refurbishments. Figure 2.x: Extend a buildings operational phase through periodical renovations and refurbishments Initial (Capital) Cost The initial (capital) cost comprises all the costs necessary that ensure the building realization up to the moment of its active building use. Occurring costs are thus not only the construction of a building but also all related processes of project planning and development that are involved such as: Land costs, such as costs for acquisitions and necessary preparation of land. Professional fees, which apply for involvement of building planning professionals such as architect, engineer, lawyer, etc. Construction Cost, encompass all cost for the erection of the building and installment of projected building systems Commissioning Cost, comprising all cost applicable to certify necessary fulfillment of standards and requirements or the approval for building operations of building systems involved. Promotional and sale cost, for informing theà prospectsà about special discounts,à sale, orà schemes. Funding costs, In general,à priceà of obtainingà equity capital Management costs, comprising all cost necessary for the organizingà andà coordinatingà theà activitiesà of an enterprise in accordance with certainà policiesà and in achievement of project realization. Operational Cost The operational phase encompasses all the cost necessary to utilize and use the building according to its original purpose. Operational cost are becoming more and more noticeable over the life cycle of a project; due to the long period of building use they can grow significantly bigger than initial costs (). For instance, when à ¢Ã¢â ¬Ã ¦ According to Ruegg and Marshall (1990), operational costs can be identified as: Energy Costs, includes necessary fuel and all applicable energy costs Operation and Maintenance Cost, includes non-fuel operation costs, such as management, cleaning, servicing, rates and taxes, sewerage, salvage, funding costs, routine maintenance, furnishings, supply à ¢Ã¢â ¬Ã ¦ (check Ruegg) Repair and Refurbishment Costs, includes appraisal of all foreseen and estimated cost for repair or replacements of building systems or elements during a buildings use. Post-Operational Cost Post-operational cost includes the collection of all cost necessary cost that may appear at a building end of use. Mostly due to economic needs or owner related circumstances the buildings operational use becomes infeasible and a variety of options require to be considered. Unlike industrial products, the end of a buildings life cycle does not necessarily determine the end of a buildings life but instead refers to the end of a buildings original determined use. A building can thus have more than one operational cycle, when through post-operational interventions a new cycle of building use can be created. Post-operational cost can thus be categorized as Renovations Cost, represent minor repairs and makeovers necessary to maintain or reinstall building quality and use. Refurbishment Cost, include the cost necessary for major overhauls of buildings or building elements that otherwise result in obsolete building conditions. Refurbishment may also include the change of a buildings original use. Demolition, Disassembly and Recycling Cost likely occur at the end of a building life cycle. While in typical product life cycle the terms represent individual strategies involving separate specifications and costs, contemporary building removals mostly include the three them associating to separate treatment of individual buildings elements. Moreover, a number of regained materials and building elements may even create cost reduction due to their existing value possible reuse or recycling purposes. Sale, though the sale of a building does not essentially represent a cost per se, such case can occur when the new owner faces major difficulties for further use of the facility (i.e. due to contamination). Still, even if not a cost, the sale of a building can be used for LCC considerations, for instance if the sale of a building can be seen as a considerable reduction of buildings LCC due to the buildings inherited value. LCC declaration During a programming phase of building projects, cost estimations require to determine individual element of cost or benefits. To do such Tempelmans Plat (2001) points out that each demand and supply requires being determined in terms of quality, quantity, time and money. While quite often there is no or little basis of estimating future cost, estimations of future costs start by reflecting the current cost or benefit values as point of departure. Since cost estimations are subject to time related changes, costs or benefits require thought, whether to expect fundamental changes in the demand and supply of goods and services in question over time, or if considerable change of service or quality of goods are to be expected. If there is no sound basis to believe otherwise, it deems appropriate to assume that changes of prices will be approximately the same as prices in general (Ruegg Marshall, 1990). Still, the estimation of all cost elements usually poses a major difficulty due to their probabilistic nature and the distinctive character between individual costs elements. Common uncertainties for the prediction of long-life projects are: its life-cycles prediction, the interpretation of operation and maintenance costs, revenues and unforeseen or unpredictable factors that affect project economics. Since dealing with so many unknowns, it appears difficult to anticipate cost and benefit related developments. Existing methods of dealing with high risk exposure are best guess, relating to individual risk attitudes and risk adjustment through the introduction of methods using probability and statistics (Ruegg Marshall, 1990). The consideration of a LCC study period is expected to relate to the following factors such as the investors and stakeholders projected time horizon, the anticipated life time of the building, project, etc., the decision whether to accept or reject the choice, or whether the perspective is individually private or public perspective oriented. For instance, an investor or project developer might only be interested in short term cost as it is intended in creating revenue from the sale of the finished building project, while a building owner or operator might rather focus on evaluation the operative cost of a building design and their involvement over the complete life-cycle. When considering the overall sustainability of a building project, the complete life-cycle must be considered and anticipated. Cost estimation during early design stages During a schematic design phase of a building design, traditionally only construction costs are estimated. Such procedure comes with the disadvantage that long term costs that, if considered, may significantly influence design outcomes are usually not reflected. The practice of introducing operational and/or post operational costs thus require for designers specific estimation and understanding to prevent a decision-making and in a premature design situation. Since experiences of cost estimation for construction costs originate from knowledge gained during earlier comparable projects, a case-based oriented approach, such as suggested by Sowa and Hovestadt (2008), can also be used and practiced for other LCC members. Because such estimation and declaration of costs generally requires for extensive experience, the use and creation of databases that allow for differentiation and declaration may not easily compensate for. Cost estimators usually have considerable experience gained through working in the building construction industry, estimating and monitoring building costs through all the stages realization stages of a project (NIBS, 2010). The estimation of cost thus not only require for skills such as a clear judgment and straightforward attitude, but for qualities such as awareness, uniformity, consistency, verification, documentation, evaluation, and analysis . Yet, with the growing complexity of building projects, it seems vital to have the cost estimations involved right from the very beginning to ensure that the project estimations reflect the decisions made. Especially during the early design stage, changes will require estimates to be prepared at different levels during the design process with increasing degrees of information provided. At any point of a design, not all portions of the design would be at the same level of completeness. Yet typical, such contingencies for the aforementioned will be reduced as more design documentation is produced (NIBS, 2010). For instance, the estimation of construction costs typically corresponds to the phases of the building design and development process in a top-down manner, meaning that cost estimates improve their precision and detailing with the progressing stages of design realization. In addition, cost estimates usually try to comply with considered standards within the building industry. In the United States, for instance, a widely accepted system provided for cost estimates is the UniFormatà ¢Ã¢â¬Å¾Ã ¢ or, for later planning stages the MasterFormatà ¢Ã¢â¬Å¾Ã ¢ (CSI, 2011) system, which allows design teams to evaluateà alternative building designs and systems. In Europe, cost estimates are usually practiced according to DIN regulations such as the DIN 276/277 for cost estimation and declaration of building designs (Frà ¶hlich, 2007). A building projects first cost estimates can already appear during the architectural programming phase with the purpose to facilitate budgetary and feasibility determinations. Usually based on past information with adjustments made for specific project conditions such estimates are prepared to develop a project budget. At such level, design schemes normally do not yet exit, required data for cost appraisals are thus drawn from general functional description, schematic layout, and geographic location, building size expressed as floor-area, numbers of people, seats, cars, etc., and intended use. Respective estimates are thus based on costs per square units, and/or alternatively number of cars/rooms/seats, etc. During the schematic design phase, the purpose of estimate is to create a more complete assessment that is typically based on a better definition of the scope of work. While also compared to earlier budgetary and feasibility determinations, an estimate at this level may be used to price various design schemes in order to see which scheme best fits the budget, or it may be used to price various design alternatives, or construction materials and methods for comparison. The more developed schematic design criteria such as a detailed building program, schematic drawings, sketches, renderings, diagrams, conceptual plans, elevations, sections and preliminary specifications are reflected. Available information is typically supplemented with descriptions of soil and geotechnical conditions, utility requirements, foundation requirements, construction type/size determinations, and any other information that may have an impact on the estimated construction cost. The goal at the end of schematic design is to have a design scheme, program, and estimate that can be contained within budget . Net Benefits (NB) LCC considerations are typically used to make cost-effective choices, as its technique is to compare alternatives competing primarily on the basis of costs (Ruegg Marshall, 1990). Yet, if a building design is planned to generate revenue, a comparison of invested costs to its predicted returns can help to determine advantages between designs options. In such case, the method of calculating the net benefits (NB) of a building option is considered an applicable way of finding the most economically efficient choice among alternatives. In such case, the calculation of NB is achieved by subtracting the time-adjusted costs of an investment from its time-adjusted benefits (Ruegg and Marshall, 1990). In relation to building-volume optimization, because the optimization of cost is generally expected to steer a building-volume design towards minimized volume/surface ratio, window/opening ratio and/or net surface areas, the integration of revenue considerations can help to justify the amount of indispensable volume reduction when practicing BVO. Similar to cost considerations, the estimation of buildings projected revenue can be established by floor-area declarations. In addition, while a buildings annual income is expected to change depended on its market value over the span of a buildings life-cycle; the diagram in figure 2.x shows how a buildings generated income can be perceived as originating from a products marketing perspective, which consists of at least four stages of introduction, growth, maturity and decline . Figure 2.x: A products marketing perspective over a life cycle. Source: Kà ¶nig (2009) The prediction of generating buildings revenue thus requires for understanding and forecasting these changes over a given period; its moments of rise and decline that strongly depend on a buildings perceived value and its decay due to intensity of use (elaborate further, see Koenig). Shown in Figure 2.x, when plotting a typical development of cost and revenue predictions the financial profitability of building occurs at point a, and becomes obsolete when the cost of become larger than the income generated. Such situation appears at operation time b with operation cost appearing higher than the income; at least at this point the buildings economic purpose becomes unsuccessful. Figure 2.x Cost vs. Revenue. Source: Kà ¶nig (2009) When adapting a buildings foreseen lifecycle to this understanding, a buildings lifetime and the creation of revenue can be exceeded by interference of the maturity process through possible renovation or refurbishment measures. In Figure 2.x a buildings generated income during a foreseen life-cycle may thus be illustrated by separating the building operation period by new construction constructions phases that are required for the renovation and/or refurbishment of the building. Figure 2.x: A buildings generated income extended through renovation and refurbishment top. Source: Kà ¶nig (2009) In reality, the periods between theses interventions very much vary from the owners intention to keep high-level building quality or the necessity to prevent a building from becoming obsolete or having higher operation costs that income. From an economic standpoint, interventions to improve the buildings ideally take place when profitability can be increased or maintained. For instance, Kà ¶nig et al. (2009) suggest that, in an industrialized country, a replacement and improvement of buildings insulation performance should take place after a period of 20-30 years. Especially with the amount of operation costs strongly increasing due to continuously rising energy costs, the need for innovations and improvement for reducing buildings energy consumptions became highly prominent. Finally, because a clear definition of a buildings income require for experiences of earlier comparable cases, the use of existing data are necessary to help predicting the revenue curve and the point of interventions for necessary building improvements. An optimization, particularly of passive resource oriented building improvement thus depends on well implemented predictions and assumptions of a buildings foreseen life-cycle and performances. Yet, when of a designer existing experience or the amount available data is not sufficient and/or its quality is questionable, the building-volume optimization process may clearly suffer from it. Conclusion The use of assessing life-cycle costs (LCC) is seen as tool that helps associating estimated costs over a projects foreseen life span. LCC of a building or a building system are defined as the total discounted amount of cost of owning, operating, maintaining and disposing over a defined period of time . The consideration to use life-cycle cost as an objective for the BVO model is based on its ability to include different building costs over a specified period, allowing for comparison and impact analysis between, for instance, initial and operational costs. The establishment of LCC as an objective for building performance optimization thus defines the primary BVO model goal. To be effective, the attempt of reducing overall building costs requires for a cost distribution that allows for effective declaration and activation of significant building elements during early architectural design stages. According to volume geometry, this can be building-volume surfaces as well as building flo or-areas. With the possibility to link costs to selected areas, the model requires a wider variation of costs to be successful. Because early design stages mostly refer to estimated costs; cost distribution and specification is more likely to be based on users experience or existing available data originating from earlier comparable building design cases . For the BVO model currently only initial and operational have been integrated because convincing and direct associations between post-operational costs and building elements at a buildings lifes end are hard to foresee and the available options appear diverse. Still, eventual costs for the renovation or refurbishment of buildings or building parts can be integrated as they are usually more common and estimations based on area declaration exist. While the main aim of the BVO model lies in the improvement of the buildings geometry (volume of the building) and not in the building system that eventually operates it, the induced process is understood as to eliminate or reduce the amount of incurring cost of a projected design before they occur. Once a building-volume design is established, system considerations may then further reduce costs by means of using appropriate technology as practiced by engineers. As mentioned earlier, Eberle (2007) suggested that active and passive design features are responsive towards each other, thus the priority in the design process should aim for optimizing passive design features first as they do not require the use of additional resources. Because constant definitions already include premade assumptions and partial definitions on an incorporated system they should be chosen wisely as not to affect unrealistic results. BVO design is thus understood proactive, as its primary intention is the improving passive design elements of the building-volume. Yet, the integration of LCC helps to understand significance of individual cost members and effectively use the diff
Subscribe to:
Posts (Atom)